Hey all, With the coming of the good weather, I'm getting ready to set up my backyard for outdoor sound. I already have four Advent Marbl speakers and a decent car stereo hard-wired to a strong DC power supply. If I put the volume above 50% the speakers just put out fuzz. Total crap. And this is with only two of the speakers connected. So... * Is it the speakers? (175w RMS) * Is it the wiring? (16 gauge) * Is it the stereo? (18w RMS) * Is it the power supply? (12vDC* 10A = 120w) I'm looking for someone who works at a car stereo installation place, or who really knows about this kind of stuff down to the technical wattage, ohms, wire-length and gauge, etc. level. Ultimately I want to drive eight speakers from one unit, using the "front" and "back" settings on the car stereo, and the "surround" line-out on each of the four main speakers. See the attached PNG file if you're interested. https://www.ebay.com/p/Advent-Marble-Main-Stereo-Speakers/69600291 https://www.crutchfield.com/S-xO4AMhTXX8Q/p_500CDA9883/Alpine-CDA-9883.html Please contact me if you're interested in helping me on-site (Greenfield), or pass this along to someone you may know who knows about this stuff. Thanks, Mik -- Mik Muller, owner Montague WebWorks 413-320-5336 http://MontagueWebWorks.com Powered by ROCKETFUSION -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.hidden-tech.net/pipermail/hidden-discuss/attachments/20170418/ca83c666/attachment-0001.html -------------- next part -------------- A non-text attachment was scrubbed... Name: Mik Backyard Speakers.png Type: image/png Size: 16387 bytes Desc: not available Url : http://lists.hidden-tech.net/pipermail/hidden-discuss/attachments/20170418/ca83c666/attachment-0001.png