At Fri, 1 Jul 2016 12:39:11 -0400 Spike McLarty <spike.mclarty at gmail.com> wrote: > > > > Anybody on the list who's worked with WiFi (or any other wireless digital > networking) in a hostile environment? By 'hostile' I just mean a factory > or machine shop with lots of intermittent, bursty RFI from unknown sources. > Not, like, bad guys with jammers ;-) > > I'm imagining somebody who actually understands WireShark filters and has > used a radio-spectrum analyzer. > > I work at machinemetrics.com - we do production equipment monitoring and > analytics, and we've gotten outside our zone of expertise trying to do WiFi > at some customer machine shops where the WiFi part of the spectrum is > really messy. Question: Is *wireless* a requirement or just a convience? My understanding of machine tools is that they are not something that are moved -- they tend to be bolted to the floor (or are just so heavy they might as well be). The *easy* solution would be to just run Cat 5e or Cat 6 cables (in armored conduit!). Even if the machines themselves are not networked, having a RJ45 jack or two handy by each machine or work area and then jacking in laptops with Ethernet patch cables might be a workable solution. Big electric motors, especially DC (and AC/DC) ones, give off all sorts of RF 'noise'. Fixed speed AC ones are not as bad, but can also be noisy. > > -spike _/\_ > > MIME-Version: 1.0 > > _______________________________________________ > Hidden-discuss mailing list - home page: http://www.hidden-tech.net > Hidden-discuss at lists.hidden-tech.net > > You are receiving this because you are on the Hidden-Tech Discussion list. > If you would like to change your list preferences, Go to the Members > page on the Hidden Tech Web site. > http://www.hidden-tech.net/members > > -- Robert Heller -- 978-544-6933 Deepwoods Software -- Custom Software Services http://www.deepsoft.com/ -- Linux Administration Services heller at deepsoft.com -- Webhosting Services