[Hidden-tech] help with enterprise grade router recommendation?

Donald M Stevens dstevens at tryandfindit.com
Mon Oct 19 20:34:05 EDT 2015


Hi Sara,

The signal shows on the router as being strong. 
**** this is good

The space is 3 rooms: 244 sq. ft., 475 sq. ft. (middle)and  244 sq. ft. 
****  okay, I assume at either end, or the furthest points way from the router, you can still get good signal?

The bldg was renovated a few years back when we moved in so all the interior walls are new constructions and no insulation or anything. Networking is in the middle room. Mostly the laptops experiencing issues have been in the room right next to the network equipment.
***** this all sounds good, no walls to go through? If there are its sounds like it is just sheet rock.

That is why I was not thinking along the lines of access points to transmit 
the signal in the other rooms.
**** you are correct, no need to extend this signal

They so have wireless phones 2.5GHz about 6 
feet away from the wireless router. 
***** aaahhhhhhh, Is it possible that you can turn off those wireless phones. Let me know if you still have the connection issues.

**** how many computers? All of them connect wirelessly, no wired ones?
**** IP phones? How many? I assume they are wired into the router or a switch and then into the router?

**** get me this information. However, I have seen where the wireless phones and wireless network can get in each others way.
**** what channel and frequency are you using on 
The wireless router and network devices?
The wireless phones?


Thanks!

Don Stevens

TFI technologies, LLC 
“we are here to help”
159 Patricia Circle
Springfield, MA 01119
Office: 413.209.8333
Cell / Text: 860.614.4153
Email: dstevens at tryandfindit.com


-----Original Message-----
From: hidden-discuss-bounces at lists.hidden-tech.net [mailto:hidden-discuss-bounces at lists.hidden-tech.net] On Behalf Of Sara MacKay
Sent: Monday, October 19, 2015 5:09 PM
To: jwerner at jwdp.com; hidden-discuss at lists.hidden-tech.net
Subject: Re: [Hidden-tech] help with enterprise grade router recommendation?





Sara

-----Original Message-----
From: Jan Werner
Sent: Friday, October 16, 2015 3:31 PM
To: Sara MacKay ; hidden-discuss at lists.hidden-tech.net
Subject: Re: [Hidden-tech] help with enterprise grade router recommendation?

As Robert Heller pointed out, what you are looking for is a wireless access point that can handle more connections than what you have.

A router is what assigns LAN addresses and routs traffic to them. An access point is a radio transmitter that broadcasts those signals.

In most small networks, one device does both functions. That is what is commonly referred to as a "router" and it is that is the word I use in the following, but in a large enterprise, those functions are usually handled by separate devices.  Unless you plan to learn a lot about network management in a hurry, I would second Chris Hart's suggestion to get a more powerful-off-the shelf router.

Routers are generally rated by their theoretical maximum throughput in Mbps. The prefix N indicates a single band (2.4GHz) and AC indicates dual band (2.4GHz+5GHz). Newer dual band routers are usually optimized for handling multiple devices simultaneously. Anything rated AC1900 or better should be more than enough for your situation.

I have at least 20 devices (PCs, printers, smartphones, tablets, stereo receivers, TV) on my home WiFi network and had been experiencing similar problems to what you described using 3-year old ASUS RT-N66U router (rated N900). I replaced it recently with a newer ASUS RT-AC68U (rated
AC1900) and everything has been running smoothly since then.

Jan Werner
__________

Sara MacKay wrote:
>
>
>
>
>
> Hi Folks,
> Can anyone recommend an enterprise model router for a medium/small 
> business?  I have a site that is connecting to their wireless fine 
> (signal is strong) but randomly,  folks are getting dropped from the 
> wireless.  Or if they are trying to connect more than 10 laptops 
> sometimes not everyone can connect.  They have Comcast business cable 
> so I don’t think bandwidth is the problem. Last spring when we 
> upgraded to cable, all network equipment was upgraded to gigabyte 
> units. Any wiring used is all cat5e.  There are still 2 desktops and 2 
> network printers in the mix as well.
> This is a learning center and when they do online testing, dropping in 
> the middle of it is really problematic. They have over 30 laptops, not 
> to mention other devices that the staff walk in with (phones, i-pads) 
> and rarely are they all in use, but but it has happened. Or rather 
> been attempted.
> I have the opportunity to put in for approx $1000 for this line item, 
> though if there is no solution in that price range, I can make a case 
> for more. Unfortunately the request has to go in in the next couple of 
> days and I have no history purchasing one of these.
> Anyone have any recommendations on routers that can handle that, or 
> which mftr would be reliable to look at?
> Sara
>
>
> _______________________________________________
> Hidden-discuss mailing list - home page: http://www.hidden-tech.net 
> Hidden-discuss at lists.hidden-tech.net
>
> You are receiving this because you are on the Hidden-Tech Discussion list.
> If you would like to change your list preferences, Go to the Members 
> page on the Hidden Tech Web site.
> http://www.hidden-tech.net/members
> 

_______________________________________________
Hidden-discuss mailing list - home page: http://www.hidden-tech.net Hidden-discuss at lists.hidden-tech.net

You are receiving this because you are on the Hidden-Tech Discussion list.
If you would like to change your list preferences, Go to the Members   
page on the Hidden Tech Web site.
http://www.hidden-tech.net/members


Google

More information about the Hidden-discuss mailing list