[Hidden-tech] Seeking advice on protecting a Linux box from failures

[Jason Malstrom]

I agree with everything Michael says. If you are running a command
line program, then have the system boot into command line instead of
graphical login.If you are using a graphical program, considering
using a simple window manager rather than gnome or kde, such as
fluxbox or openbox. Even LXDE or XFCE would be better. Reasoning is
that things like GNOME and KDE are complex and are generally setup
that if they crash, they exit you would of your entire session.

On Thu, Aug 25, 2011 at 2:40 PM, Michael Leuchtenburg
<michael at slashhome.org> wrote:
>   ** Be sure to fill out the survey/skills inventory in the member's area.
>   ** If you did, we all thank you.
>
>
> On 2011-08-25 14:05, Daniel Belmont wrote:
>> I have a special purpose Linux machine that is used to run musical
>> instruments and is used frequently in concert settings ... so
>> preventing failure is of importance ... I am looking for advice on
>> two things :
>>
>> 1) I need a UPS that produces pure sine waves, has reliable battery
>> backup that will instantly kick in during voltage dips, isn't too
>> heavy (or wildly expensive), rack mountable would be nice (but I can
>> deal with something that is around 25 pounds even if it is not rack
>> mountable), and does voltage regulation ... someone suggested that
>> there are UPS's that always provide power from the constantly
>> recharging battery -- that could be interesting ...
>
> There are two major types of UPSes: line-interactive and online. The
> kind which "kicks in during voltage dips" is line-interactive - it
> doesn't work with things with finicky power supplies. Online UPSes
> always provide power from the batteries, so it's much more reliable.
> There are definitely rack mountable online power supplies though be sure
> to check that it's for the right rack standard. I'm not sure whether
> audio and computer rack standards are compatible.
>
>> 2) what kind of care do I need to provide to the Linux box so that
>> it works like a mission critical computer ? the right kind of UPS
>> seems important, backing up the hard drive is a given (I am doing
>> this now) ... are there other things I need to do to treat this
>> computer well ? again, since it is a musical instrument I am very
>> desirous of eliminating all of the possible causes of failure (to the
>> extent that I can) ...
>
> You could build it with no moving parts. No fans, no spinning drive -
> use SSDs. There are lots of low-power systems out there which don't need
> active cooling. It's worth considering RAID1 for the disks so that if
> one fails during a performance, for whatever reason, it won't be a
> problem, though that could be overkill. SSD failure rates are pretty low.
>
> I'd also use a distribution like Debian stable which doesn't have the
> most cutting edge versions of software, but rather has very well-tested
> software with few bugs that're likely to bite you. It might even be
> worth getting it set up so that it works just right and then taking a
> full image and re-imaging it before each performance - that way it
> doesn't change at all. You can just partition the hard drive and image
> half of it into the other half and boot off USB to copy it over.
>
> Cheers,
> Michael
> _______________________________________________
> Hidden-discuss mailing list - home page: http://www.hidden-tech.net
> Hidden-discuss at lists.hidden-tech.net
>
> You are receiving this because you are on the Hidden-Tech Discussion list.
> If you would like to change your list preferences, Go to the Members
> page on the Hidden Tech Web site.
> http://www.hidden-tech.net/members
>