At Mon, 11 May 2009 08:10:00 -0400 "Stacey Langknecht" <stacey at masscraft.com> wrote: > > MIME-Version: 1.0 > > ** Be sure to fill out the survey/skills inventory in the member's area. > ** If you did, we all thank you. > > > > > > We have a Canon printer that has decided not to print! It doesn't need ink > and we have "self-cleaned" it. The papers come out faded. Any suggestions! I have an (old!) Epson Stylis Color 600. I replace the ink carts only when the printer is totally out (I run the carts dry). When I do put new cart(s) in, it takes *at least* two cleaning cycles to get it to print properly. Sometimes even then it will print for a while and then 'fade out', requiring additional cleaning cycles. I would try additional cleaning cycles. Esp. if these are new ink carts and the previous ones were 'run dry'. Otherwise you might have defective inkcarts. > > > > Thanks so much! > > > > Stacey Langknecht > > Hotsapp Woodworks > > 413-367-9408 > > stacey at masscraft.com > > > > > MIME-Version: 1.0 > > _______________________________________________ > Hidden-discuss mailing list - home page: http://www.hidden-tech.net > Hidden-discuss at lists.hidden-tech.net > > You are receiving this because you are on the Hidden-Tech Discussion list. > If you would like to change your list preferences, Go to the Members > page on the Hidden Tech Web site. > http://www.hidden-tech.net/members > > -- Robert Heller -- 978-544-6933 Deepwoods Software -- Download the Model Railroad System http://www.deepsoft.com/ -- Binaries for Linux and MS-Windows heller at deepsoft.com -- http://www.deepsoft.com/ModelRailroadSystem/